[email protected]

BSI - BS EN 39 - Loose Steel Tubes for Tube and Coupler

Aug 15, 2001 · Find the most up-to-date version of BS EN 39 at Engineering360. 360 Careers 5G Communications Acoustics & Audio Technology Aerospace Technology Alternative & Renewable Energy Appliance Technology Automotive Technology Building & Design Building Blocks for the IoT Chemical Manufacturing Coatings & Surface Engineering Components for RF & Microwave Construction Tools Copy Not Controlled - Your Best Scaffolding Type 3 and 4 steel tubes to BS EN 39:2001 is 48.3 mm outside diameter / 3.2 mm thick 48.3 mm outside diameter / 4.0 mm thick. Tubes and fittings shall be free of cracks, surface flaws and other defects. Tubes shall be straight. All tubes should be maintained in a good condition, not

Full page photo - Scaffolding Services Products

Scaffold Structure (Assorted size -max- 6m. TYPE "Hot dip galvanized" *BS- 1139/EN-39=4mm wall thk, 48.3mrn OD, 235N/mm) yield stress. .EN-10219- 3.2mm wall then 48.3mm OD, 320 Nimm) (46 ksi) (32 kg/mm2 yield stress. Galvanised Scaffold Tube Oasis Metal Manufacturing LLCScaffolding Back; Cuplock System Heavy duty 6m hot dip galvanised steel scaffolding tube, 48.3mm outside diameter with 4mm wall thickness. Our scaffold poles are manufactured to EN39 European Standard. BS EN 39:2001:Mass/m:3.56 Kg/m:Min. Tensile strength:360 MPa:Min. Yield: PLETTAC METRIX USER GUIDE V a l i d OnlyBS EN 12811 Part 3 Temporary Works Equipment - Load Testing BS EN 39 Part 1 Metal Scaffolding, Couplers and Special Couplers in Steel BS EN 74 Series Couplers, Spigots and Base Plates for use in Falsework and Scaffolds BS 2482 Timber Boards for use in Scaffolding PLETTAC METRIX holds the following Designations under BS EN 12810-1:

Scaffolding and A essories - Actavo Direct

Scaffold tube conforms to BS EN 39, with an outside diameter of 48.3mm and a wall thickness of 4mm. The tube is pre-cut in lengths of 5, 6, 8, 10, 13, 16 and 21 - other sizes are available on request. Aluminium Tube Aluminium Tube available for Hire in length sizes up to Tube and Clamp Scaffolding Manufacturer - WellmadeWellmades Scaffold Tubes. You can find BS1139 or EN 39 standard scaffold tubes in Wellmade. The Most common wall thickness of the BS EN Standard scaffold tubes is in 3.2mm and 4.0mm. While Japanese (JIS) and Korean Standard (KS) tube scaffolding are in 2.4mm thickness. Scaffold tube in O.D 42mm, O.D 60mm, O.D 33.7mm(34mm) etc are available too. steel group en39 scaffolding tube - SCH40 Steel Pipes factoryBS EN 39:2001 - Loose steel tubes for tube and coupler steel group en39 scaffolding tubeBS 1139-1.2:1990 Metal scaffolding. Tubes. Specification for aluminium tube 20/30424615 DC BS EN 74-2. Couplers, spigot pins and baseplates for use in falsework and scaffolds. Part 2. Special couplers. Requirements and test procedures 20/30424612 DC BS EN 74-1.

the Hi-Lite Advantage - HI-LITE Systems Inc

thickness is strictly prohibited. All tubes to be - hot-dip galvanised . EN 39 tube to be clearly & permanently marked, prior to galvanising at intervals not exceeding 1.5m with Specification (e.g. EN 39), name or trademark of manufacturer ,wall thickness (i.e.4) and vear of manufacture).Offshore scaffolding Professional Manufacturer & Supplier BS EN 39 Offshore Scaffold Tubes In the offshore scaffolding, oil gas companies always choose type 4 scaffold tube conform to BS EN 39 standard with hot dip galvanizing finish. Offshore Scaffold Double Coupler Wellmade manufactures both E-galvanized (zinc-plated) and Hot dip galvanized right angle coupler for the oil gas companies.